How do you use POR-15 Metal-Ready?

How do you use POR-15 Metal-Ready?

How do you use POR-15 Metal-Ready?

Apply with brush, roller, spray, or dip rusted metal directly into solution. On Bare Or Rusted Metal Surfaces: Keep surface wet for 20 minutes, then rinse thoroughly with water. Remove excess from painted or chrome surfaces as quickly as possible to avoid discoloration.

Do you need to use metal prep with POR-15?

Is it always necessary to apply Metal-Ready first before using POR-15 Rust Preventive Paint? No. Metal-Ready must be used first before applying POR-15 when 1. Painting on galvanized metal.

Can POR-15 be applied to bare metal?

WHAT IS THE BEST SURFACE ON WHICH TO PAINT POR-15? POR-15 likes rusted surfaces best. Seasoned metal and sandblasted metal are also good. POR-15 does not adhere well to smooth, shiny surfaces, but will adhere well to those surfaces with the proper preparation.

Can you put undercoating over POR-15?

POR-15 Rubberized Undercoating can be applied to cleaned bare metal but is best when applied over POR-15 Rust preventive Coating.

Does POR-15 stick to primer?

With POR-15 Metal Prep, you can apply POR-15 Rust Preventive Coating and any opaque primer or top coat with ease.

How do you get POR-15 off your hands?

You can try all the toxic chemicals and solvents you want, Por15 will not come off your skin with those. What did work was vegetable oil. I soaked some into a paper towel, and then rubbed the towel over the stuck on Por15, waited 60 seconds, and rubbed it off with a dry paper towel.

Can u paint over por 15?

Yes! It is okay to paint over Por 15 as it accepts all paint formulas, including lacquer-based ones. In addition, we have the Por 15 Tie-Coat Primer that helps prepare the surface before you topcoat with the Por 15. Therefore, the paint job will be as easy as if you were using any regular paint.

How do you prepare for undercoating?

Before applying, the surface must be free of any dirt, dust, oil, grease and any contamination that may interfere with adhesion. Remove loose paint and rust with a wire brush or sandpaper. Remember to mask off any areas that you do not want coated with Undercoating before spraying the product.