Why is my phone charging slow and backwards?
Usually when this happens, the phone is detecting a cable plugged in, but no power is actually being sent to the phone battery. The common causes are a bad cable, worn out USB port, or the wall charger itself going bad and getting weak.
Why is my HTC charging so slow?
The first thing to check when the HTC 10 charging slowly is to check the charging cable. Sometimes the charger cable has been damaged or lost the proper connection to charge the HTC 10. Before purchase a new cable, try switching it out with another USB cable that works to see if the issue is with the cable.
How do I fix a slow charging speed?
Don’t forget the charging port Maybe your phone is the issue, and one of the most common reasons for a slow charging battery is something as simple as a dirty smartphone charging port. Look in there and see if you can spot any debris. Try to clean it out with compressed air or a small brush.
Why is my phone randomly charging slow?
There may be the following reasons for the slow charging of Android phones or Android not charging: The charger or data cable is not plugged in properly. Slow charging because the charging port is not clean. High ambient temperature and slow charging when the phone is hot.
How can I make my HTC charge faster?
Solution 2: Check the Power Source Moreover, if your USB cable has undergone the slightest of damage then this rate of charge is going to slow down further. If you are using wireless charging also the power source should be adequate. It is better you plugged in your device to a dedicated charger for a faster charge.
Can I use rubbing alcohol to clean charging port?
Can I clean my charging port with rubbing alcohol? No, you should not clean your iPhone charging port with rubbing alcohol. If cleaning out the charging port with a toothpick or compressed air didn’t fix your problem, the port is likely already damaged. Cleaning with alcohol may only cause further damage.
How do you clean the dust out of a charging port?
Turn off your device and use the can of compressed air or the bulb syringe to clean out the charging port. Blast a few short bursts and see if any dust falls out. If using compressed air, make sure you’re holding the can upright to avoid getting water inside the port.