What is Tiva launchpad?
Texas Instruments EK-TM4C123GXL Tiva™ C LaunchPad Evaluation Board is a low-cost evaluation platform for ARM® Cortex™-M4F-based microcontrollers.
What is tm4c123 microcontroller?
The TM4C123G is a member of the class of high performance 32 bit ARM cortex M4 microcontroller with a broad set of peripherals developed by Texas Instrumentals. The TIVA launchpad has a built-in processor clock frequency of up to 80MHz with a floating-point unit (FPU).
How much RAM and ROM does our microcontroller in TM4C123GXL have?
256KB Flash, 32KB SRAM, 2KB EEPROM.
How many UART modules are there in TM4C123GH6PM controller?
8 UART modules
First of all the TM4C123GH6PM has 8 UART modules! In the launchpad you can use UART0 to communicate through the USB programming port into a COM.
What is Tiva microcontroller?
The Tiva C Series microcontrollers. provide a broad portfolio of floating- point enabled ARM Cortex-M4F. MCUs. Designers who migrate to the.
How many JTAG pins are present in Tiva board?
Joint Test Action Group (JTAG), standardized as the IEEE 1149.1, is a standard test access port used to program and debug the microcontroller board. Each microcontroller uses five port pins for the JTAG interface.
How many GPIO pins are there in TM4C123GH6PM?
six ports
The TM4C123GH6PM microcontroller contains six ports and thus six of these physical GPIO blocks.
Which is the core in Tiva TM4C123G processor?
ARM Cortex-M processor core
Description. Texas Instrument’s Tiva™ C Series microcontrollers offer an 80 MHz Cortex-M with FPU, a variety of integrated memories and multiple programmable GPIO. All members of the Tiva™ C Series, including the TM4C123G microcontroller, are designed around an ARM Cortex-M processor core.
What type of ADC is used on the Tiva C Series LaunchPad?
ADC Code TM4C123G This ADC code of TM4C123GH6PM microcontroller reads analog input from AN0 pin and based on digital value turns on or turns off the onboard green LED of TM4C123G Tiva C launchpad. If measured digital value is less than 2048 LED will remain off.
How many bits per port are accessible through LaunchPad pins?
8 bits
Ports 1 – 10 are 8 bits wide meaning we read and write port pins 8 bits at time. Not every port on the MSP432 LaunchPad has all 8 pins. An input port allows the software to read external digital signals.
What is the maximum clock frequency of TM4C123GH6PM?
In Tm4c123gh6pm microcontroller, we can use up-to 80MHz. On the board, we have 16 MHz external crystal. So by multiplying this value 5 times, we get 80 MHz.