What is deflection track for metal studs?
Slotted Deflection Track is a CFS top track manufactured to prevent cracking of finishes applied to interior partition framing resulting from deflection of structure above. This is achieved by fastening studs to top track through provided slots, allowing fastener vertical movement of up to 1 ½”.
What is slotted track for?
Slotted track allows the vertical movement of the building and prevents axial load transfer to the wall studs. OEG Slotted Track is used in exterior curtain walls or non-load bearing walls.
What is slip track in framing?
A slip track is a channel section (typically the top track) of a non-load bearing or curtain wall framing assembly that is fastened to the primary structure, but left unconnected to the vertical stud members.
Who makes metal studs?
Below is a directory of cold formed metal framing manufacturers (MF 05 40 00) with links to get more information about each company….Cold Formed Metal Framing Manufacturers.
| Brady Innovations LLC | Flannery Inc. |
|---|---|
| Macalloy LTD. | MarinoWARE |
| Ram Steel Framing | Steeltec Supply, Inc. |
| Telling Industries |
What is single deflection track?
1. Deflection track is constructed with a. single, long leg track, a gap is left between the wall. stud and the track web, and a row of bracing is placed. INTRODUCTION.
Where are deflection heads required?
Deflection heads are used within plasterboard partitions when needing to allow for movement (up, down or both) within the structure at the head of a partition. This movement (or deflection) is created by live and dead loads on the floor or roof above.
What is a deflection track?
Who owns Clark Dietrich?
About ClarkDietrich® Building Systems Clarkwestern Dietrich Building Systems is a 75/25 joint venture with Marubeni-Itochu Steel America Inc. (MISA) and Worthington Industries, Inc.
What is ClarkDietrich?
ClarkDietrich, headquartered in West Chester, Ohio, and established in 2011, is a construction materials manufacturing company specializing in interior and exte. 9050 Centre Pointe Drive, Suite 400, West Chester, Ohio, 45069, United States. Phone Number: (513) 870-1100. www.clarkdietrich.com.
When should deflection track be used?
Cold-Formed Steel Engineers Institute TECH NOTE W101-09 September 2009 1 Summary: When cold-formed steel studs are used on exterior walls between spandrel beams or floor slabs to create the exterior envelope of the building, a deflection track is often required at the top of the wall to allow for the roof or floor …
Why do you need a deflection head?
Deflection heads are used within GypWall partitions and linings or GypWall Shaft systems when needing to allow for movement (up, down or both) within the structure at the head of a partition. This movement (or deflection) is created by live and dead loads on the floor or roof above.