How long does Behr Wet Look Sealer last?
about 2 years
Product lasted about 2 years.
What is Behr Wet Look Sealer for?
Beautify, protect and preserve the natural beauty of all your home’s concrete & masonry surfaces with BEHR PREMIUM Concrete, Brick & Tile Wet-Look Sealer. This high-gloss formula can also be used on pavers, artificial stone and stucco, and it also makes a great topcoat over paints and stains.
Is Behr Wet Look Sealer acrylic?
BEHR PREMIUM Wet-Look Sealer is a clear, non-yellowing, high solids, acrylic-based masonry sealer. It is formulated to seal, protect and beautify concrete and masonry surfaces with a high gloss finish.
Does wet Look sealer make it slippery?
The solids content of these sealers is very high which fills the paver pores and creates a solid layer of sealer on the surface which will make things slippery when wet.
How do you apply Behr wet look sealer?
Use when air and surface temperatures are between 50-80 degrees F. Do not apply in direct sunlight, on wet surfaces, or if rain or heavy dew is expected within 24 hrs. If the sealer is sprayed on, back roll for a uniform thickness. For added sheen and durability, additional coats (no more than 4) may be applied.
Is Behr Wet Look Sealer solvent based?
This state of the art formula offers exceptional stain and mildew resistance with long lasting protection against color fading. The Armor AR 350 is a solvent based wet look acrylic concrete sealer that can be used to seal and enhance concrete and paver surfaces.
How do you remove Behr wet look sealer?
Here’s Behr’s reply: “The Wet-Look Sealer can be removed with a methylene chloride base paint stripper. You may also want to use a pressure washer in conjunction with the stripper.”
Is wet Look sealer slippery?
A wet-look appearance is just like the name implies, the bricks look wet but not shiny. The wet look sealers are also less slippery when wet, unlike glossy finishes. The best paver sealer with a wet look, but no shine comes down to a couple of choices.
Is high gloss sealer slippery?
One of the dangers of using a high-gloss sealer is that it can become incredibly slippery when wet. This is why putting it around the pool or on any flat outdoor surface is a bad idea.
How long does it take Behr wet look sealer to dry?
Allow to dry 24 hours for light foot traffic. 72 hours to reposition furniture/heavy foot traffic and park tires on corrugated cardboard for 14 days. Clean with a mild, non-abrasive liquid detergent after 30 days.