How does a Dyna ignition work?
Dyna ‘S’ model ignition is a popular electronic ignition trigger plate and rotor button that uses the stock points-type mechanical flyweight assembly to control ignition advance instead of an electronic “black box”. Simple and compact, everything fits behind the stock point cover.
What is the difference between single fire and dual fire ignition on a Harley?
Single fire ignitions separate the firing pulses, only firing the cylinder under compression. The main advantage of dual fire systems is simplicity and low cost.
What is the importance of ignition control module in a motorcycle?
Essentially, a CDI box controls a motorcycle’s ignition system by starting the ignition and combustion process. A pulse of voltage from the motorcycle battery passes through the CDI box to fire up the spark plug.
How do you test a Dyna electronic ignition?
OHMMETER TEST Disconnect the Dyna S wires from the coils. Connect the negative ohmmeter lead to the mounting plate and the positive lead to one of the coil (-] wires. This should read open [infinite ohms) on all ranges. Any other reading indicates a damaged output.
What is a Dyna S?
Trusted by top racers for more than 20 years, the Dyna S high-performance ignition system is a complete self-contained electronic ignition system specifically engineered for Harley-Davidson motorcycles.
What is the Dyna 2000 digital ignition system for Harley Davidson?
The Dyna 2000 Digital Ignition System for Harley-Davidson includes expanded advance curve functionality with the option to use vacuum advance compensation via a V.O.E.S. switch.
What kind of ignition system does Harley Davidson use?
Trusted by top racers for more than 20 years, the Dyna S high performance ignition system is a complete self-contained electronic ignition system specifically engineered for Harley-Davidson motorcycles. The Dyna 3000 Digital Performance Ignition gives you increased power, torque and peak horsepower over the stock factory ignition.
Is the Dyna 2000i single fire or dual fire?
Featuring single fire operation down to 0 RPM for easier cranking and kicking, the Dyna 2000i will operate in all combinations of single fire or dual fire with single plug or dual plug heads (when used with appropriate coils).
What kind of wire is in a Dyna 2000i?
The Dyna 2000i was built to last — it cannot be damaged by broken or disconnected spark plug wires. The harness was constructed with TXL cross linked polyethylene automotive wire for exceptional resistance to abrasion, heat, and chemical attack.