How do I turn off the security on my Jeep Grand Cherokee?

How do I turn off the security on my Jeep Grand Cherokee?

How do I turn off the security on my Jeep Grand Cherokee?

Open the driver’s side door, with all other doors closed. You’ll then need to press the LOCK button on the key fob. Then, close the driver’s side door and keep all doors closed for at leaSTSRXteen seconds. The security dash light should stop flashing quickly, indicating that the security system has been reset.

How do you reset the security system on a 97 Jeep Grand Cherokee?

Press the power door-lock switch on the keyless entry fob. Close the driver’s side door. Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed.

How do you disarm the alarm on a 1995 Jeep Grand Cherokee?

Just remove the door panel on either of the front doors, locate the 2 wires going to the lock cylinder switch, cut and connect the two wires together. This will permanently disable the alarm.

How do you turn off the alarm on a 1996 Jeep Grand Cherokee?

Try locking the doors with the switch on the drivers door then shut the door and unlock it (drivers door) with just the key,that should reset the alarm system. To permanently disable,cut and ground out purple/yellow wire under driver side kick panel.

How do you reset the security system on a 1996 Jeep Grand Cherokee?

Very easy to fix, put the key in the drivers door, turn it to lock and unlock about 3-5 times, that will reset it. Thats how the ZJ alarms work..

How do you turn off the alarm on a 2001 Jeep Grand Cherokee?

Disconnecting The Battery

  1. Locate the hood release latch on the front of the Grand Cherokee and open the hood.
  2. Locate the negative terminal on the Cherokee’s battery.
  3. Loosen the terminal with a pair of channel locks.
  4. Remove the terminal from the Cherokee’s battery to disable the car alarm.

How do you disconnect a car Immobiliser?

Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.