How do I fix HP WHEA uncorrectable error?

Table of Contents

How do I fix the Whea Uncorrectable error?

Disable Overclock in BIOS. Press Windows key + I to open the Settings app.
Check if there are any hardware issues.
Run Windows Memory Diagnostics.
Update your drivers.
Uninstall the problematic Windows Updates.
Disable Turbo Boost feature in BIOS.
Disable additional audio devices.

How do I fix Windows uncorrectable error?

How to fix WHEA_UNCORRECTABLE_ERROR

Get all the latest updates with Windows Update. Go to Start > Settings > Windows Update , and then select Check for updates.
Try restoring Windows back to an earlier point in time.

Is WHEA uncorrectable error serious?

If you see WHEA_UNCORRECTABLE_ERROR, it indicates a hardware error. You probably need to reinstall or fresh install Windows 10. In most cases, system reinstallation will cause data loss. Thus, you are advised to recover data from your computer even it fails to boot.

Can overheating cause WHEA uncorrectable error?

Conclusion. WHEA UNCORRECTABLE ERROR is a common BSOD error that may occur due to a faulty hardware component. However, the most common cause is low voltage to the processor and overheating CPU due to overclocking and inefficient cooling system.

What does Whea_uncorrectable_error mean?

Resolution. The error WHEA_UNCORRECTABLE_ERROR”stands for Windows Hardware Error Architecture. If you receive a blue screen error (also known as a stop code) with WHEA_UNCORRECTABLE_ERROR, it means that a hardware issue has occurred on your computer.

Can processor cause BSOD?

If you see this blue screen, you’re probably overclocking your CPU, but this is not always the case. The 7F error is known to attack indiscriminately, lashing out at more than just overclockers. This particular BSoD can rear its head in response to bad RAM, a faulty motherboard, or a corrupted BIOS.

How do I start HP BIOS in Safe Mode?

Click Start, type msconfig in the search field, and then press the enter to open the System Configuration window. On the General tab of the System Configuration window, select Diagnostic startup. On the Boot tab, select Safe boot and click OK. When prompted, click Restart to start the computer in Safe Mode.