Can you change the stand on a Sony Bravia TV?
Two stand options are available for each applicable model. There is no need to change the TV’s feet. The feet can rotate towards the sides or the centre of the TV.
Can you buy legs for Sony TV?
Where to obtain a replacement for a broken or missing part for the television stand. Replacements for broken or missing parts for the television stand are available through Sony® Parts and Accessories Sales.
How do I take the legs off my Sony Bravia TV?
Using a standard flat-head screwdriver, insert it vertically into the stand insertion slot at the bottom of the TV. Pry the stand loose by pushing the screwdriver handle up towards the TV screen side until the stand comes out a little from the insertion slot. Pull the table-top stand out of the insertion slot by hand.
Can you remove legs from TV?
Unscrew them as far as they will go but they may not come out. Then the leg has two little tabs that lock it in place. I believe you should lift the leg a bit away from the tv and pull down away from the screen .
How do I get the foot off my Sony Bravia TV?
Instructions to remove the stand Using a standard flat-head screwdriver, insert it vertically into the stand insertion slot at the bottom of the TV. Pry the stand loose by pushing the screwdriver handle up towards the TV screen side until the stand comes out a little from the insertion slot.
How can I raise the height of my TV?
Pull the TV stand out from the wall to look behind the unit. Check for adjustment brackets that would allow you to raise the height. If the stand is adjustable, lift the base to the desired height and secure with the fasteners unique to your particular TV stand.
How can I stand my TV without a stand?
Here is a closer look at the most popular mounting methods on how to mount a TV without a stand:
- Hang your TV on the wall. Fixed TV Wall Mount. This type of mount does not move but provides a stable base for you to mount your TV on the wall.
- Mount on the Ceiling. Motorized Fold-Down.
- Mount on the floor. Fixed Floor Pole.
What can I use as a TV riser?
Use a circular saw to cut the wood down to the correct length. We cut three pieces. Use a table saw to cut the rounded (long) edges of the wood down flat so that they can be glued. Make one solid riser piece by adding wood glue to the long ends of the boards and then clamping the pieces together.
Can you put soundbar behind TV?
Putting a soundbar behind the TV will interfere with reduce the sound quality by obstructing the sound waves. Soundbars are designed to be positioned just under your TV, and there shouldn’t be anything directly in front of the soundbar.