Are side cutters and diagonal cutters the same?

Are side cutters and diagonal cutters the same?

Are side cutters and diagonal cutters the same?

One of the key differences is that diagonal cutters are often better suited to smaller, more delicate cutting tasks, whereas side cutters are ideally suited to larger-scale applications. While this isn’t always the case, it is useful to know as a general rule.

Which type of pliers use to cut wire diagonally?

Diagonal pliers (or wire cutters or diagonal cutting pliers or diagonal cutters or side cutters or dikes or Nippy cutter) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything).

What is a diagonal side cutters used for?

Diagonal cutting pliers are used for cutting wire and small pins in areas that cannot be reached by larger cutting tools. Because the cutting edges are diagonally offset about 15 degrees, these can cut objects flush with a surface.

What tool is called a dyke?

Dykes 4.5″ Side Cutter Diagonal Wire Cutting Pliers Diagonal Wire Cutter Side Cutting Pliers (wire cutter)

How do you use diagonal cutting pliers?

How to use diagonal cutting pliers

  1. Step 1 – Open jaws. Open the jaws of the diagonal cutting pliers by moving the handles apart.
  2. Step 2 – Place object between jaws.
  3. Step 3 – Squeeze handles together.
  4. Step 4 – Troubleshooting.

What can I use if I don’t have a wire cutter?

Wire Cutter Substitutes

  1. Hacksaw. A hacksaw has a thin metal blade roughly 12 inches long, supported on each end by a metal frame.
  2. Tin snips. Tin snips has two sharp blades, with handles roughly 8 inches long.
  3. Angle Grinder.
  4. Reciprocating Saw.

What does a dike look like?

A geologic dike is a flat body of rock that cuts through another type of rock. Dikes cut across the other type of rock at a different angle than the rest of the structure. Dikes are usually visible because they are at a different angle, and usually have different color and texture than the rock surrounding them.

What is the purpose of a dyke?

As an engineering term, a dyke is a form of flood protection designed to keep seawater or river water from overrunning land that is adjacent to it. Dykes are usually permanent structures that are built in areas that are located below sea level and are thus uninhabitable.